FAR LaboratoriesTM

Dyna Piers

Steel Piers

Standard Height Dyna Pier

DP-1300
Fully assembled steel pier. Quick mates to Floor plate (DP-Floor) or can be bolted to other surfaces. ź-20 hole in top, but can be special ordered with any size hole. Any ź-20 Mount, such as our Dyna Cradle will fit on top. With the use of the mounting plate MP4 (ETX), you can mount any of the ETX scopes on it, or with the MP-1 mounting plate, it will fit LX-10, LX-200 or C5i or C8i. Pre drilled and capped one inch holes at top and bottom for internally routing cables.
Finish: textured Black Powder coated finish. Includes four bolts, washers and wrench.
Height: 51.5" or 1300mm Weight: 42 pounds (19kg.)

Adjustable Height Dyna Pier

DP-Adjust
Fully assembled steel pier. Quick mates to Floor plate (DP-Floor) or can be bolted to other surfaces. ź-20 hole in top, but can be special ordered with any size hole. Any ź-20 Mount, such as our Dyna Cradle will fit on top. With the use of the mounting plate MP4 (ETX), you can mount any of the ETX scopes on it, or with the MP-1 mounting plate, it will fit LX-10, LX-200 or C5i or C8i. Pre drilled and capped one inch holes at top and bottom for internally routing cables.
Finish: textured Black Powder coated finish. Includes four bolts, washers and wrench.
Height Adjustable from 36" to 66" Weight: 49 Pounds (22kg.)

Dyna Pier Angles Arm

(for my wheelchair confined friends and family)
DP-Angle
Fully assembled steel pier. Quick mates to Floor plate (DP-Floor) or can be bolted to other surfaces. ź-20 hole in top, but can be special ordered with any size hole. Any ź-20 Mount, such as our Dyna Cradle will fit on top. With the use of the mounting plate MP4 (ETX), you can mount any of the ETX scopes on it, or with the MP-1 mounting plate, it will fit LX-10, LX-200 or C5i or C8i. Pre drilled and capped one inch holes at top and bottom for internally routing cables. Balanced for one person installation.
Finish: textured Black Powder coated finish. Includes four bolts, washers and wrench.
Height under arm 31" (to accommodate wheel chairs) Height at mounting point 34.5" Arm is 19"
Weight 41 Pounds (19kg.)

Quick Flush Mounting Floor Plate for Dyna Piers

DP-Floor
This is the flush mounting base for the Dyna Piers A 8 inch x 8 inch stainless steel plate that you set flush into concrete. The Dyna Piers attaches quickly with only four bolts, allowing quick realignment and removal when not in use. Supplied with a kit of flush mounting stainless screws (to keep the holes from filling with ice and debris when not in use) and wrench.
Weight: 8 pounds (3.6 kg.)

Home

FAR Laboratories
P.O. Box 25
South Hadley, MA 01075-0025

800.336.9054
Western Massachusetts 413.467.9262
Fax 413.467.9393

All You Add Is the Sky

All contents ŠCopyright 1998-2010 FAR Laboratories. All Rights Reserved.